Flying a Mission
Was this helpful?
Was this helpful?
Auterion Mission Control will automatically prompt you to start, continue or resume a loaded mission, and you can also use the Action button at the bottom of the toolbar to choose any actions that are appropriate for the vehicle state (e.g. to start, pause, or continue a mission). You can also set any waypoint as the current target by selecting it on the map and then using the confirmation slider.
If you have a mission loaded but you want to fly manually, you can cancel the prompts and get them back later using the Action button. To stop the prompts altogether you will need to clear the mission from the vehicle (use Plan View > File/Sync tools to clear the mission).
The drone will arm, take off and start the mission without you doing anything else. It is that easy! You can monitor the progress on the map and use the telemetry instrumentation provided.
Pause a mission by selecting the Pause button on the toolbar and then using the slider on the confirmation prompt. The altitude at which the vehicle should wait when paused may be set using the vertical slider on the right-hand side of the screen.
Mission Control will prompt you to continue the mission after pausing (or if you take off with a mission loaded). If the dialog is closed, you can get it back and continue the mission using the Action button on the toolbar.
For more details on flying missions, please Click Here
