# USB Formating ### Recommended USB-C Flash Drive * The Aurora Map ships with this **USB-C flash drive.** * We recommend a USB 3.1 drive with a write speed above 50 mb/s. ### USB Setup The USB flash drive will be formatted to ensure compatibility with Aurora. However, if you face any problems or wish to use another USB flash drive, you can format it using the following instructions. ## Formatting the USB Drive #### Mac * Open Disk Utilities and click on the flash drive in the sidebar. * Select the Erase option at the top of the window. #### Windows * Open This PC to show all connected drives. * Locate the USB drive you want to use with Aurora, right-click on the image, and select "Format...". A small window should open. * Select ExFat under the File System dropdown and click Start. * Once that completes, right-click on the USB drive in This PC again and select Eject --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.camflite.com/crd1/maintenace-manual/usb-formating.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.